皮皮学,免费搜题
登录
logo - 刷刷题
搜题
【单选题】
London’s First Light Rail System The Docklands Light Railway (DLR) took just three years to build at a cost of £77 million. It is London’s first Light Rail System, but its route follows that of a number of older lines, which carried the nineteenth century railways through the crowed districts of the East End. The section of the line from the Tower Gateway Station to Poplar follows the line of one of London’s earliest railways, the London & Blackwell (1840), a cable-drawn railway (later converted to steam) which carried passengers to steam ships at Blackwell Pier, and provided transport for the messengers and clerks who went backwards and forwards between the docks (码头) and the city every day. From Poplar to Island Gardens, a new line crosses high above the dock waters, and then joins the old track of the Millwall Extension Railway, built to service the Millwall Docks (1868) and to provide transport for workers in the local factories. This line was horse-drawn for part of its route, until the 1880s. The Polar to Stratford section of the DLR route was first developed by the North London Railway, built in the 1850s to link the West and East India Docks with the manufacturing districts of the Midlands and North of England. There were major railway works and sidings (岔线)at Bow until recently. The trains are automatically controlled from a central computer, which deals with all signaling and other safety factors, as well as adjusting speeds to keep within the timetable; on board each vehicle, Train Captains, who are also fully qualified drivers, are equipped with two-way radios to maintain contact with central control. There are passenger lifts, and self-service ticket machines, at every station. 第11题:The passage tells us that London’s first Light Rail System.
A.
was constructed in the nineteenth century.
B.
will be finished in three years’ time.
C.
follows some of the original lines.
D.
took three years longer than expected to complete.
手机使用
分享
复制链接
新浪微博
分享QQ
微信扫一扫
微信内点击右上角“…”即可分享
反馈
参考答案:
举一反三
【单选题】JT3130—88 《汽车危险货物运输规则》将危险货物分为( )类
A.
九类
B.
七 类
C.
八 类
D.
三 类
【单选题】《汽车危险货物运输规则》将危险货物分为()类。
A.
B.
C.
D.
【多选题】UDP报文中包括的字段有
A.
源端口/目的端口
B.
源地址/目的地址
C.
长度和校验和
D.
报文序列号
【多选题】理想变压器的性质及变换关系,下面描述正确的是( )
A.
变压关系
B.
变流关系
C.
变阻抗关系:二次侧的阻抗引入一次侧,得
D.
功率性质:理想变压器消耗的功率为零
【多选题】UDP 报文中包括的字段有()
A.
源端口 / 目的端口
B.
源地址 / 目的地址
C.
长度和校验和
D.
序列号
【单选题】用15ml/m 3 福尔马林加7.5克高锰酸钾对实验动物的饲养室和实验室进行熏蒸消毒,熏蒸后静置()。
A.
24-48h
B.
48-72h
C.
24-48d
D.
2-4h
【单选题】实验动物的饲养室和实验室进行熏蒸消毒,室温保持________。
A.
37℃
B.
50℃
C.
25℃
D.
80℃
【单选题】交通部标准JT3130-80《汽车危险货物运输规则》将危险货物分为( )类。
A.
6
B.
7
C.
8
【单选题】用 15ml/m3 福尔马林加 7.5 克高锰酸钾对实验动物的饲养室和实验室进行熏蒸消毒,熏蒸后 静置________。
A.
24-48h
B.
48-72h
C.
24-48d
D.
2-4 hh
【单选题】UDP报文中包括的字段有()
A.
目的地址
B.
源地址
C.
长度和校验和
D.
报文序列号
相关题目:
参考解析:
知识点:
题目纠错 0
发布
创建自己的小题库 - 刷刷题