皮皮学,免费搜题
登录
logo - 刷刷题
搜题
【简答题】
阅读下面短文,根据第 73 至第 75 小题的具体要求,简要回答问题,并将答案转写到答题卡上。 A long time ago,Milton S. Hershey, the creator of the popular chocolate bars, was dipped inwarm chocolate. I know all about it. My grandfather was there! At nineteen,Hershey established a candy business in Philadelphia.Although it failed, he tried again in several other cities and succeeded withCrystal A Caramels. But Hershey was not content. He began experimenting withchocolate and managed to sell his first chocolate bars in 1900. They were aninstant success. In 1903, Hershey built a factory. Hershey wasusually pleasant and kind and enjoyed a good joke. However, in his chocolatefactory, he held high standards for all the workers. He was both respected andfeared. His anger would burst out when things didn’t go as he’d expected, andworkers were fired for mistakes. My grandfatherbegan working in the factory as a young man. His job was to push the vats (大桶) of warm chocolate toa storage area. To do this, he had to push the heavy vats up a ramp (斜坡) and across thewalkway. One day, Hershey was walking backward on the walkway while mygrandfather was pushing a vat of chocolate up the ramp. Bump. Clunk. Ker-plop!Hershey fell backward into the vat. Everyone else held their breath and ran upto pull him out. Grandfather froze in fear. Was he going to lose his job? Hershey stood stiffly with his hands on his hips. Colorrose in his face. He said something in a low voice. Then he smiled. “It’s notyour fault, son,” he said. “I need to watch where I’m going.” He put somechocolate in his mouth. “Mmm, that’s good,” he said. Everyone laughed. The tourcontinued, with Hershey dripping chocolate as he went. And Grandfather kept hisjob. 73.  What did Grandfather do in Hershey’s factory? (回答词数不超过 12 个) He pushed the vats of warm chocolate to a storage area. 74.  Why didn’t Hershey fire Grandfather? (回答词数不超过 10 个) Because herealized it was his own fault. Because herealized it was not Grandfather’s fault/mistake. 75.  What does theincident show us about Hershey? (回答词数不超过 15 个) ( Itshows us that ) Hershey was pleasant, humorous, kind ( toothers ) and really respectable.
手机使用
分享
复制链接
新浪微博
分享QQ
微信扫一扫
微信内点击右上角“…”即可分享
反馈
参考答案:
举一反三
【单选题】艾滋病病毒感染者和艾滋病病人应当将其感染或者发病的事实如实告知
A.
父母
B.
同事
C.
朋友
D.
同学
E.
与其有性关系者
【单选题】患儿,8岁,疝内容物可达阴囊处,外形呈梨形,其消失与指压内环、增加腹压有关。诊断应考虑为
A.
腹股沟斜疝
B.
股疝
C.
腹股沟直疝
D.
切口疝
E.
脐疝
【多选题】下列哪些因素会影响血氧的测量精确度?()
A.
低温、药物影响
B.
指甲油、染色剂
C.
低灌注、贫血
D.
运动干扰、光干扰
【判断题】脱水是指粘土矿物分解放出化合水。
A.
正确
B.
错误
【单选题】选择题:LC并联网络在谐振时呈 。
A.
容性
B.
阻性
C.
感性
【单选题】下图是门电路四人抢答器的电路原理图,下面哪种说法是正确的。【图片】
A.
当有人抢答时,如 2号选手抢答时,按钮 SB6 被按下,与非门 U 13 A的 1 管脚输入 低 电平,此时与非门 U13A的输入状态为 1111 ,则其输出为 0 ,经非门 U14C后 输出为 1 ,发光二极管 VL2 亮 , VL2发光表示 2 号选手抢答成功。
B.
当有人抢答时,如 2号选手抢答时,按钮 SB6 被按下,与非门 U 13 A的 1 管脚输入 高 电平,此时与非门 U13A的输入状态为 1111 ,则其输出为 0 ,经非门 U14C后 输出为 1 ,发光二极管 VL2 亮 , VL2发光表示 2 号选手抢答成功。
C.
当有人抢答时,如 2号选手抢答时,按钮 SB6 被按下,与非门 U 13 A的 1 管脚输入 高 电平,此时与非门 U13A的输入状态为 1111 ,则其输出为 1 ,经非门 U14C后 输出为 1 ,发光二极管 VL2 亮 , VL2发光表示 2 号选手抢答成功。
D.
当有人抢答时,如 2号选手抢答时,按钮 SB6 被按下,与非门 U 13 A的 1 管脚输入 高 电平,此时与非门 U13A的输入状态为 1111 ,则其输出为 0 ,经非门 U14C后 输出为 0 ,发光二极管 VL2 亮 , VL2发光表示 2 号选手抢答成功。
【单选题】粘土矿物分解放出化合水是指下列那个反应
A.
干燥
B.
脱水
C.
熟料烧结
D.
冷却结晶
【判断题】1891年,重庆辟为商埠,朝天门开始设立海关。
A.
正确
B.
错误
【单选题】工程建设监理的中心任务是
A.
监理规划
B.
风险管理
C.
目标控制
D.
组织协调
【简答题】图14-18是一自动关灯电路(例如用于走廊或楼道照明)。在晶体管集电极电路接入JZC型直流电磁继电器的线圈KA,线圈的功率和电压分别为0.36W和6V。晶体管9013的电流放大系数β为200。当将按钮SB按一下后,继电器的动合触点闭合,40W220V的照明灯EL点亮,经过一定时间自动熄灭。(1)试说明其工作原理;(2)刚将按钮按下时,晶体管工作于何种状态?此时I C 和I B 各为多少?β是否为2...
相关题目:
参考解析:
知识点:
题目纠错 0
发布
创建自己的小题库 - 刷刷题