皮皮学,免费搜题
登录
logo - 刷刷题
搜题
【单选题】
When you choose a freezer, remember it's probably going to be with you for a long time. No single style. or size is best, so it's important to know which freezer is right for your needs. First, decide if you want an upright or chest model. Uprights are more convenient. Their storage space is more accessible and they take up less floor area. However, chest models are more energy-efficient because less cold air escapes when they are open. If you're buying an upright, you'll have to choose between frostless or manual defrost. Chest freezers are always manual. Frostless freezers automatically defrost at preset intervals and remove the water. Manual models must be defrosted by hand every few months or whenever frost accumulates to about a quarter of an inch. To help your freezer reach a ripe old age, try to find a spot that's cool, dry, and away from drafts. Drafts and heat will raise the freezer's cabinet temperature and make it work harder to keep cool. That means wasted energy and a shortened compressor life. Dry air is important because high humidity can cause the freezer to rust outside and frost up inside. With proper care, a freezer can serve you for 15 years or more. Frostless models require less care than manual defrost freezers. The interior of a frostless unit should be washed periodically with warm water and baking soda or a mild soap, rinsed, and dried. To get the most from your freezer, check regularly to make sure it's providing a true zero-degree temperature. Keep the freezer at least three-quarters full. The emptier it gets, the more energy is wasted. If more than three pounds of food per cubic foot of storage space is added every 24 hours, the resulting high or low temperatures can damage the food. Which is NOT the difference between upright model freezer and chest model freezer?
A.
An upright model takes less room on the ground.
B.
An upright freezer is easier for people to put in and take out food.
C.
A chest freezer is more effective than an upright one.
D.
A chest model need manual defrost while an upright one needn't.
手机使用
分享
复制链接
新浪微博
分享QQ
微信扫一扫
微信内点击右上角“…”即可分享
反馈
参考答案:
举一反三
【单选题】曲线 在点 处切线斜率等于( )
A.
12
B.
8
C.
-6
D.
6
【单选题】()是一种最常用的溶剂,它能溶解多种化学物质,但对油脂类物质的溶解能力很差。
A.
B.
有机溶剂
C.
油剂
D.
乳剂
【单选题】活塞离曲轴回转中心最近处是()
A.
下止点
B.
上止点
C.
活塞行程
【多选题】焊接作业在熔焊过程中由于焊条及焊接材料等不同,所产生的电焊烟尘成分也有所差异,但其主要成分多以( )等组成的混合性粉尘。
A.
氧化铁
B.
氧化锰
C.
氟化物
D.
二氧化硅
【判断题】在计算机制图文件中,当使用电子签名与认证时,应符合国家有关电子签名法的规定。
A.
正确
B.
错误
【单选题】曲线 在点 处切线斜率等于
A.
2
B.
4
C.
6
D.
8
【单选题】曲线 在点 处切线斜率等于( )
A.
8
B.
12
C.
-6
D.
6
【判断题】由于点焊是低压大电流焊接,在焊接过程中,导体会产生大量的热量,所以焊钳、焊钳变压器等需要进行水冷。
A.
正确
B.
错误
【单选题】对结构形状复杂、刚性大及大厚度焊件,由于焊接过程中产生很大的应力,容易使焊缝产生裂纹,应选用()。
A.
低氢型焊条
B.
氧化钛钙型焊条
C.
钛铁矿型电焊条
【单选题】摩擦焊本身是一个机械化的焊接方法,焊接过程、焊接质量和生产率都要由焊接设备来保证,因此设备要具备一定条件,下列条件中不是必需的是()。
A.
足够大的主轴电动机功率
B.
足够大的轴向压力和夹头夹紧力
C.
合适的停车速度
D.
较小的占地面积
相关题目:
参考解析:
知识点:
题目纠错 0
发布
创建自己的小题库 - 刷刷题