以下是路由器R2的配置命令列衣,请将(4)~(6)空缺处的命令/参数填写完整,以实现路由器R2的正确配置。 Router>en Routerconf term Router (config) hostname R2 R2 (config) int e0 R2 (config-if) ip address (4) R2 (config-if) no shutdown R2 (config-if) int s0 R2 (config-if) ipaddress 192.168.2.2 255.255.255.0 R2 (config-if) no shutdown R2 (config-if) (5) R2 (config) ip routing R2 (config) ip route 0.0.0.0 0.0.0.0 (6) R2 (config) ip classless R2 (eonfig) exit R2copy run start